Temporary strainers capture construction debris during data center liquid cooling flushing before that debris reaches equipment intended for clean service. Cone or plate screens can provide an accessible coarse-filtration stage in a temporary pipe circuit, but they cannot replace fine filtration or the water-quality checks required before startup. The key decisions are where the strainer […]
Clean a CDU strainer screen when accumulated debris restricts coolant flow and the removable metal element remains undamaged. Replace the screen when the mesh, support, welds, or seating surfaces can no longer meet the required condition, or when approved cleaning cannot restore it. The correct decision depends on measured differential pressure, the element’s physical condition, […]
Choose data center liquid cooling filters by loop, particle retention, flow, pressure drop, coolant compatibility, and maintenance needs. In liquid-to-liquid CDU systems, facility-side and server-side filtration protect different components and require separate specifications. For a CDU manufacturer or cooling system integrator, the practical goal is to protect downstream equipment while maintaining the required coolant flow. […]
Is plastic really porous, or always solid? Most everyday plastic products are non-porous, but engineered porous plastic is different. It is made with a controlled network of tiny connected pores, so air, gas, or liquid can pass through while larger particles are blocked or flow is controlled. In suitable filtration designs, porous plastic filters can […]
A stainless steel wire mesh and powder composite plate is a porous metal plate made by combining stainless steel wire mesh with stainless steel powder, then shaping and bonding them through rolling, folding, pressing, and vacuum sintering. This structure is designed to balance two important needs: permeability for fluid flow and mechanical strength for engineering […]